Live Video Feeds
We are upgrading our security monitoring system. The new system is self contained, manages recording internally and does not rely on an external computer. I believe it will be much more efficient and reliable. Installation starts on May 27th 2005 and may take some time until fully implemented so you will see the feeds change as more cameras are added. We have also added our first high quality IR camera that can see up to 120 feet in total darkness. It is presently installed on the front patio. Once this upgrade has been completed we will have motion activated 24 hour a day recording of most of the hotels public areas. This will be very useful to capture any car break-ins, hit and runs, slip and fall incidents, or our property walking out the back door. It will also make the front office personnel more aware of what is happening around the property and allow them to see where there is available parking.
To view the feeds you must download, install and configure the viewer.
Once installed, run program and a screen like the one above will be displayed. Now you need to configure it. Click on the Settings button on the right side and make the following changes.
1) Change Name to: Riviera
2) Change the IP Address to: 220.127.116.11
3) Chnage port to: 85
4) Change the User ID to: user
5) Change the Password to: 11111
Once done click OK to save and close then click the Connect button in the lower left of the control panel. Once loaded you can view all 16 feeds at the same time, select individual cameras, or groups, and if installed direct any remote controlled cameras. The system will only allow one user at a time. so if you cannot get on it's probably being used. If you have any questions, just ask.